![Materiaal instelling1 project gallery](https://commarker.com/wp-content/uploads/2024/03/project-gallery.jpg)
Material Settings for ComMarker Machines
ComMarker lasergraveerders and markers can engrave and cut a huge variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels. The only limitation may be your imagination.
These laser parameters have been tested mostly with our ComMarker laser engraver, but they can also be applied to other power laser sources in the market. Understand that the result on your material can be different from the result shown in the videos. That happens for various factors such as other material components, different power laser source quality, a different lens, enz.
Basic information: Instelling: Basic information: Basic information: Basic information: Instelling: Basic information: Material Info Making Time(S) 30S Snelheid(mm/sec) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30S Instelling: For filling only Process Method:Filling Process Material:PCD board Snelheid(mm/sec):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only:
Basic information: Instelling: Basic information: Basic information: Basic information: Instelling: Basic information: Material Info Making Time(S) 30S Snelheid(mm/sec) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30S Instelling: For filling only Process Method:Filling Process Material:PCD board Snelheid(mm/sec):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only:
Basic information: Instelling: Basic information: Basic information: Basic information: Instelling: Basic information: Material Info Making Time(S) 30S Snelheid(mm/sec) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30S Instelling: For filling only Process Method:Filling Process Material:PCD board Snelheid(mm/sec):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only:Machine :B4 20W
110mm lens refocused 1-2 mm
Software: Ezcad
Snelheid: 330 of 300
Stroom: 85 of 80
Frequentie: 55 of 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Instelling:
Process Method Filling/picture
Process Material Stainless steel
Snelheid(mm/sec) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequentie 25Machine:B4 20W
200mm lens refocused 3mm
Software:Licht branden
snelheid: 750
stroom: 60
frequentie: 80khz
Lines per inch:0 .02
2 passesMachine:B4 30W
110mm lens with correct focus
Software:lightburn
snelheid:1000
stroom: 90
frequentie:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
Snelheid: 2000
Stroom: 30
Frequentie: 100
Lines per inch:0.05
Angle:45Machine:B4 30W
200mm lens as a fill
Software:lightburn
snelheid:1500
stroom: 50
frequentie:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Snelheid(mm/sec) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequentie 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Instelling:
Process Method 3D sliced
Process Material Aluminum plate
Snelheid(mm/sec) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequentie 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Instelling:
Process Method ID card
Process Material ID card
Snelheid(mm/sec) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board(1mm)
Snelheid(mm/sec) 1000
Max Power(%) 90
Frequentie 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Instelling:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequentie(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Instelling:
Process Material Rusted coin
Snelheid(mm/sec) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Instelling:
Process Method Filling
Process Material Slate
Snelheid(mm/sec) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(S) 58
Process Method Filling
Process Material Stainless steel
Snelheid(mm/sec) 120
Max Power(%) 100
Pass 1Machine :B4 20W
110mm lens refocused 1-2 mm
Software: Ezcad
Snelheid: 330 of 300
Stroom: 85 of 80
Frequentie: 55 of 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Instelling:
Process Method Filling/picture
Process Material Stainless steel
Snelheid(mm/sec) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequentie 25Machine:B4 20W
200mm lens refocused 3mm
Software:Licht branden
snelheid: 750
stroom: 60
frequentie: 80khz
Lines per inch:0 .02
2 passesMachine:B4 30W
110mm lens with correct focus
Software:lightburn
snelheid:1000
stroom: 90
frequentie:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
Snelheid: 2000
Stroom: 30
Frequentie: 100
Lines per inch:0.05
Angle:45Machine:B4 30W
200mm lens as a fill
Software:lightburn
snelheid:1500
stroom: 50
frequentie:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Snelheid(mm/sec) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequentie 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Instelling:
Process Method 3D sliced
Process Material Aluminum plate
Snelheid(mm/sec) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequentie 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Instelling:
Process Method ID card
Process Material ID card
Snelheid(mm/sec) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board(1mm)
Snelheid(mm/sec) 1000
Max Power(%) 90
Frequentie 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Instelling:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequentie(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Instelling:
Process Material Rusted coin
Snelheid(mm/sec) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Instelling:
Process Method Filling
Process Material Slate
Snelheid(mm/sec) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(S) 58
Process Method Filling
Process Material Stainless steel
Snelheid(mm/sec) 120
Max Power(%) 100
Pass 1Machine :B4 20W
110mm lens refocused 1-2 mm
Software: Ezcad
Snelheid: 330 of 300
Stroom: 85 of 80
Frequentie: 55 of 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Instelling:
Process Method Filling/picture
Process Material Stainless steel
Snelheid(mm/sec) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequentie 25Machine:B4 20W
200mm lens refocused 3mm
Software:Licht branden
snelheid: 750
stroom: 60
frequentie: 80khz
Lines per inch:0 .02
2 passesMachine:B4 30W
110mm lens with correct focus
Software:lightburn
snelheid:1000
stroom: 90
frequentie:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
Snelheid: 2000
Stroom: 30
Frequentie: 100
Lines per inch:0.05
Angle:45Machine:B4 30W
200mm lens as a fill
Software:lightburn
snelheid:1500
stroom: 50
frequentie:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Snelheid(mm/sec) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequentie 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Instelling:
Process Method 3D sliced
Process Material Aluminum plate
Snelheid(mm/sec) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequentie 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Instelling:
Process Method ID card
Process Material ID card
Snelheid(mm/sec) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board(1mm)
Snelheid(mm/sec) 1000
Max Power(%) 90
Frequentie 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Instelling:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequentie(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Instelling:
Process Material Rusted coin
Snelheid(mm/sec) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Instelling:
Process Method Filling
Process Material Slate
Snelheid(mm/sec) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(S) 58
Process Method Filling
Process Material Stainless steel
Snelheid(mm/sec) 120
Max Power(%) 100
Pass 1